TrailBlazer 4WD L6-4.2L VIN S (2002)
4. Install the front door sealing weatherstrips (1) to the retainer (2).
5. Install the push pin retainers (2) to the front door sealing weatherstrips located at the base of the pillar.
6. Install the cowl air inlet grille panel.
7. Install the windshield wiper arms.
8. Install the antenna mast if equipped.
9. Install the rear view mirror.
10. Install the rain sensor.
11. Close the hood.
12. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.