TrailBlazer 4WD L6-4.2L VIN S (2002)
3. Remove the screws from the weatherstrip side retainer.
4. Remove the weatherstrip side retainer from the windshield pillar.
5. Remove the windshield reveal molding.
Installation Procedure
1. Install the windshield reveal molding.
2. Install the weatherstrip side retainer (2) to the windshield pillar.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screws to the weatherstrip side retainer.
Tighten the screws to the weatherstrip side retainer to 2 N.m (18 lb in).
4. Install the push pin retainers (2) to the front door sealing weatherstrip located at the base of the pillar.
5. Close the door.
Windshield Replacement
Windshield Replacement
