TrailBlazer 4WD L6-4.2L VIN S (2002)
Headlamp Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT (HEADLAMPS)
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Disconnect the headlamp washer hose from the pump (1).
3. Remove the pump (1) from the solvent container by carefully pulling pump from the retainer (3).
4. Remove the pump (1) from the sealing grommet (2).
INSTALLATION PROCEDURE
1. Install the pump (1) to the sealing grommet (2).
2. Install the pump (1) to the retainer (3) on the solvent container.
3. Connect the headlamp washer hose to the pump (1).
4. Install the washer solvent container.
