TrailBlazer 4WD L6-4.2L VIN S (2002)
1. Route the rear washer hose along the wiring harness.
2. Tape the rear washer hose to the wiring harness with 3 wraps of electrical tape at points no more than 100 mm (4 in) apart from each other.
3. Install the liftgate wiring harness to the liftgate.
4. Install the rear washer hose and grommet to the liftgate outer panel.
5. Install the liftgate interior trim panel.
6. Connect the rear wiper hose connection (4) at the liftgate outer panel.