TrailBlazer 4WD V8-6.0L (2007)
Antenna Cable: Service and Repair
Radio Antenna Cable Extension Cable Replacement
Radio Antenna Cable Extension Cable Replacement
Removal Procedure
1. Remove the inflatable restraint instrument panel (I/P) module.
2. Disconnect the antenna cable (2) from the radio extension cable.
Important: Note the location of the radio extension cable before removal.
3. Remove the cable attachments (1) from the I/P support bars.
4. Reach through the I/P compartment to disconnect the antenna cable from the radio.
5. Remove the radio extension cable from the vehicle.
Installation Procedure
1. Position the radio extension cable to the I/P support bars as previously noted.
2. Reach through the I/P compartment to connect the antenna cable to the radio.
3. Install the radio extension cable attachments (1) to the I/P support bars.
4. Connect the antenna cable (2) to the radio extension cable.
5. Install the inflatable restraint module.