TrailBlazer 4WD V8-6.0L (2007)
Trim Panel: Service and Repair
Body Side Rear Window Garnish Molding Replacement (TrailBlazer EXT, Envoy XL)
Body Side Rear Window Garnish Molding Replacement (TrailBlazer EXT, Envoy XL)
Removal Procedure
1. Remove the bolt that retains the seat belt upper anchor to the body.
2. Remove the garnish molding from the vehicle.
Installation Procedure
1. Install the garnish molding to the vehicle.
2. Install the seat belt retractor to the body.
Notice: Refer to Fastener Notice.
3. Install the bolt that retains the seat belt anchor to the body.
Tighten the anchor bolt to 70 N.m (52 lb ft).