TrailBlazer 4WD V8-6.0L (2007)
7. Connect the J-strips that retain the cover to the seat pan.
8. Install the push pins (1) on the underside of the seat bottom.
9. Install the latch bezels.
10. Install the seat cushion bracket.
11. Install the seat cushion in the vehicle.
Seat Cushion Outer Trim Panel Replacement
Seat Cushion Outer Trim Panel Replacement
Removal Procedure
1. Remove the trim panel from the power seat by performing the following:
1. Remove the 3 seat switch bezel mounting screws.
2. Remove the 3 trim panel retaining screws.
2. Remove the trim panel from the manual seat by performing the following steps:
1. Remove the lumbar support knob.
2. Remove the seat back recliner handle.