TrailBlazer 4WD V8-6.0L (2007)
Radiator Cooling Fan Motor Relay: Service and Repair
Cooling Fan Relay Replacement
Tools Required
J 43244 Relay Puller Pliers
Removal Procedure
1. Remove the underhood electrical center cover.
2. Using the J 43244, remove the cooling fan relay (3).
Installation Procedure
Notice: Installation of the proper relay is critical. If an enhanced relay - equipped with a diode - is installed into a position requiring a standard relay -
equipped without a diode - excessive current will damage any components associated with the relay or its associated circuits.
1. Install the cooling fan relay (3).
2. Install the underhood electrical center cover.