chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Key Will Not Release From Ignition Lock Cylinder|Page 3985 > < A/T - Key Will Not Release From Ignition Lock Cylinder|Page 3983
Page 1
background image

Lifter / Lash Adjuster: Service and Repair

Valve Lifter Replacement

Tools Required

J 3049-A Valve Lifter Remover

Removal Procedure

1. Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side or to Cylinder Head Replacement - Right Side.

2. Remove the valve lifter. Refer to Valve Lifter Removal.
3. Clean and inspect the valve lifters. Refer to Valve Lifters and Guides Cleaning and Inspection.

Installation Procedure

A/T - Key Will Not Release From Ignition Lock Cylinder|Page 3985 > < A/T - Key Will Not Release From Ignition Lock Cylinder|Page 3983