TrailBlazer 4WD V8-6.0L (2007)
Auxiliary Blower Motor: Service and Repair
Auxiliary Blower Motor Replacement (Front - Except Rainier)
Auxiliary Blower Motor Replacement (Front - Except Rainier)
Removal Procedure
1. Remove the front floor console.
2. Disconnect the electrical connectors (4) from the blower motor-auxiliary (3).
3. Remove the air outlet duct from the blower motor-auxiliary.
4. Remove the screws (2, 5) from the blower motor-auxiliary.
5. Remove the blower motor-auxiliary (3).
Installation Procedure
1. Install the blower motor-auxiliary (3).
Notice: Refer to Fastener Notice.
2. Install the retaining screws (2, 5) to the blower motor-auxiliary.
Tighten the screws to 10 N.m (88 lb in).
3. Install the air outlet duct to the blower motor-auxiliary.
4. Connect the electrical connectors (4) to the blower motor-auxiliary (3).
5. Install the front floor console.