TrailBlazer 4WD V8-6.0L (2007)
* Inspect for evidence of improper arcing.
-
Measure the gap between the center electrode (4) and the side electrode (3).
-
Inspect for the correct spark plug torque.
-
Inspect for signs of tracking that occurred near the insulator tip instead of the center electrode (4).
-
Inspect for a broken or worn side electrode (3).
-
Inspect for a broken, worn, or loose center electrode (4) by shaking the spark plug.
* A rattling sound indicates internal damage.
* A looses center electrode (4) reduces the spark intensity.
-
Inspect for bridged electrodes (3,4). Deposits on the electrodes (3,4) reduce or eliminates the gap.
-
Inspect for worn or missing platinum pads on the electrodes (3,4), if equipped.
-
Inspect for excessive fouling.
* Inspect the spark plug recess area of the cylinder head for debris. Dirty or damaged threads can cause the spark plug not to seat correctly during
installation.
Visual Inspection
* Normal operation - Brown to grayish-tan with small amounts of white powdery deposits are normal combustion by-products from fuels with
additives.
* Carbon fouled - Dry, fluffy black carbon, or soot caused by the following conditions:
-
Rich fuel mixtures
* Leaking fuel injectors
* Excessive fuel pressure
* Restricted air filter element
* Incorrect combustion
-
Reduced ignition system voltage output
* Weak ignition coils
* Worn ignition wires
* Incorrect spark plug gap
-
Excessive idling or slow speeds under light loads can keep spark plug temperatures so low that normal combustion deposits may not burn off.
* Deposit fouling - Oil, coolant, or additives that include substances such as silicone, very white coating, reduces the spark plug intensity. Most
powdery deposits will not affect spark plug intensity unless they form into a glazing over the electrode.