TrailBlazer 4WD V8-6.0L (2007)
1. Install the fuel feed or return pipe to the EVAP/fuel hose/pipe assembly.
2. Install the EVAP/fuel hose/pipe assembly retaining clips.
3. Install the EVAP/fuel hose/pipe assembly to the vehicle.
4. Remove the caps from the fuel filter and pipes at the fuel tank.
5. Connect the EVAP pipe (2) to the fuel tank.
6. Connect the fuel feed pipe (1) to the fuel tank.
7. Install the EVAP/fuel hose/pipe bracket (6) to the bellhousing stud.
Notice: Refer to Fastener Notice.
8. Install the EVAP/fuel hose/pipe bracket nut (5).
Tighten the nut to 10 N.m (89 lb in).