TrailBlazer 4WD V8-6.0L (2007)
1. Correctly position the spark plug washer.
2. Inspect the spark plug gap. Adjust the gap as needed.
Spark plug gap: 1.524 mm (0.060 in)
3. Hand start the spark plug in the corresponding cylinder.
Notice: Refer to Fastener Notice.
4. Tighten the spark plug.
* For used heads, tighten the plug to 15 N.m (11 lb ft).
* For NEW heads, tighten the plug to 20 N.m (15 lb ft).
5. Install the spark plug wire.
6. If removed, install the washer solvent container.