TrailBlazer 4WD V8-6.0L (2007)
![background image](/chevrolet/trailblazer_4wd/v8-6.0l/Page-872004.png)
Checking Aftermarket Accessories
CHECKING AFTERMARKET ACCESSORIES
Do not connect aftermarket accessories into the following circuits:
-
CAUTION: Refer to Restraint System Service Precautions.
SIR circuits, all such circuits are indicated on circuit diagrams with the SIR symbol.
-
NOTE: Refer to OBD II Symbol Description Notice.
OBD II circuits, all such circuits are indicated on circuit diagrams with the OBD II symbol.
Always check for aftermarket accessories (non-OEM) as the first step in diagnosing electrical problems. If the vehicle is so equipped, disconnect the
system to verify that these add-on accessories are not the cause of the problems.
Possible causes of vehicle problems related to aftermarket accessories include:
-
Power feeds connected to points other than the battery
-
Antenna location
-
Transceiver wiring located too close to vehicle electronic modules or wiring
-
Poor shielding or poor connectors on antenna feed line
-
Check for recent service bulletins detailing installation guidelines for aftermarket accessories.
Inducing Intermittent Fault Conditions
INDUCING INTERMITTENT FAULT CONDITIONS
TOOLS REQUIRED
J 25070 Heat Gun
Many intermittent open or shorted circuits are affected by harness/connector movement that is caused by vibration, engine torque, bumps/rough
pavement, etc. In order to duplicate the customer's concern, it may be necessary to manipulate the wiring harness if the malfunction appears to be