TrailBlazer 4WD V8-6.0L (2007)
8. Remove the oil level indicator tube.
9. Remove the seal from the transmission, if necessary.
Installation Procedure
1. Install a NEW seal to the indicator tube.
2. Install the oil level indicator tube.
Notice: Refer to Fastener Notice.
3. Install the indicator tube nut.
Tighten the nut to 18 N.m (13 lb ft).
4. Install the catalytic converter. Refer to Catalytic Converter Replacement (4.2L Engine) Catalytic Converter Replacement (5.3L and 6.0L Engines).
5. Install the transmission crossmember. Refer to Transmission Support Replacement.
6. Remove the support from the transmission.
7. Lower the vehicle.
8. Install the transmission oil level indicator.
9. Fill the transmission to the proper level with DEXRON(R) III transmission fluid. Refer to Transmission Fluid Checking. See: Testing and
Inspection/Component Tests and General Diagnostics/Transmission Fluid Checking