TrailBlazer 4WD V8-6.0L (2007)
8. Install the J 8614-01 onto the pinion as shown.
9. Remove the pinion nut while holding the J 8614-01.
10. Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01 (1) as shown.
11. Remove the pinon yoke by turning the J 8614-3 (3) clockwise while holding the J 8614-01 (1).
Important: Carefully remove the seal from the bore. Do not distort or scratch the aluminum case.
12. Remove the oil seal using a suitable seal removal tool.
13. Remove the dust deflector from the pinion yoke using a soft-faced hammer.
Installation Procedure
1. Install the new deflector onto the pinion yoke using a soft-faced hammer.