TrailBlazer 4WD V8-6.0L (2007)
Case Adapter: Service and Repair
NVG 120-NR9 - Transfer Case
Transfer Case Adapter Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle
2. Remove the transfer case assembly from the vehicle. Refer to Transfer Case Assembly Replacement.
Important: The transmission mount DOES NOT have to be removed to perform the following service procedure.
3. Remove the transmission mount bolts.
4. Install a transmission jack under the transmission.
5. Lift the transmission just high enough to remove the transfer case adapter.