Traverse AWD V6-3.6L (2011)
Tighten the bolts to 110 Nm (81 lb ft) plus 90 degrees.
5. Install the front crossmember brace bolts (3).
Tighten the bolts to 50 Nm (37 lb ft).
6. Remove the jack stand.
7. Install the lower 2 bolts to the upper bumper support.
Tighten the bolts to 9 Nm (80 lb in).
8. Install the power steering cooler (1).
9. Install the power steering cooler nuts (2).
10. Lower the vehicle.
11. Untie the condenser radiator fan module from the upper bumper support.