Traverse FWD V6-3.6L (2009)
1. Install the following suspension components to the rear suspension crossmember:
*
Lower control arm-Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair/Rear Suspension/Lower Control Arm
Replacement).
*
Adjustment link-Refer to Adjust Link Replacement (See: Steering/Tie Rod/Service and Repair/Rear Suspension).
*
Upper control arm-Refer to Upper Control Arm Replacement (See: Control Arm/Service and Repair/Rear Suspension/Upper Control Arm
Replacement).
*
Stabilizer shaft insulator brackets-Refer to Stabilizer Shaft Insulator Replacement (See: Stabilizer Bar/Stabilizer Bushing/Service and
Repair/Rear Suspension).
2. Install the right park brake cable to the rear suspension crossmember.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the right park brake cable retaining bolts to the rear suspension crossmember.
Tighten the bolts to 10 Nm (89 lb in).