Uplander AWD V6-3.5L VIN 8 (2005)
Front Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Front (Chevrolet)
Removal Procedure
1. Remove the front bumper fascia.
2. Remove the screws (4) securing the energy absorber to the lower fascia (3).
3. Remove the energy absorber.
Installation Procedure
1. Position the energy absorber to the lower fascia (3).
2. Install the screws (4) in order to secure the energy absorber to the lower fascia.
3. Position the front fascia to the vehicle.
4. Install the front bumper fascia.