Uplander AWD V6-3.5L VIN 8 (2005)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Motor Replacement
Window Regulator Motor Replacement - Front Door
Removal Procedure
1. Remove the door trim panel. Refer toTrim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .
2. Remove the water deflector. Refer toWater Deflector Replacement - Front Door See: Front Door Panel/Service and Repair.
3. Disconnect the wiring harness connector from the regulator motor connector.
4. Gently flex the 3 motor retaining tabs to release the motor from the door module.
Installation Procedure
1. Lubricate the motor drive gear teeth.
Important: The glass may need to be moved up or down in order to align the motor pinion teeth to the sector teeth.
2. Position the power window module motor to the 3 window module retaining tabs. Press into place until fully seated.
3. Connect the wiring harness connector to the regulator motor connector.
4. Install the water deflector. Refer toWater Deflector Replacement - Front Door See: Front Door Panel/Service and Repair.
5. Install the trim panel. Refer toTrim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .