Uplander AWD V6-3.5L VIN 8 (2005)
12. Remove the front pulley bolts (6, 8).
13. Remove the front pulley nut (7).
14. Remove the front pulley from the front inner quarter panel.
15. Remove the rear pulley bolts.
16. Remove the rear cable (2) from the opening at the rear of the sliding door center track.
NOTE: Use care when feeding cables to and from the center track and body to avoid damage to the coated cables and the vehicle's painted surface.
IMPORTANT: Note the routing of the cables to ensure the new cables are correctly seated.
17. Remove the rear pulley from the rear inner quarter panel.
