Uplander AWD V6-3.5L VIN 8 (2005)
1. Install the sliding door upper roller bracket to the front edge of the upper track.
2. Align the sliding door upper roller bracket (1) to the grease pencil marks.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the sliding door upper roller bracket bolts.
Tighten the sliding door upper roller bracket bolts, in sequence as shown, to 10 Nm (89 lb in).
4. Remove the support from the sliding door.
5. Adjust the sliding door, if needed. Refer toDoor Adjustment - Sliding (Manual or Power) (See: Adjustments/Door Adjustment - Sliding (Manual
or Power)) .
6. Install the headliner trim finish molding. Refer toHeadlining Trim Finish Molding Replacement (See: Interior Moulding / Trim/Headliner/Service
and Repair/Headlining Trim Finish Molding Replacement) in Interior Trim.
7. Install the sliding door garnish molding. Refer toGarnish Molding Replacement - Sliding Door (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Garnish Molding Replacement - Sliding Door) in Interior Trim.