Uplander AWD V6-3.5L VIN 8 (2005)
5. Install the liftgate handle retaining nuts (1, 2) to the studs.
Tighten the nuts to 10 Nm (89 lb in).
6. Install license plate lamp sockets by turning sockets clockwise.
7. Install the water deflector. Refer toWater Deflector Replacement - Liftgate.
8. Install the liftgate trim panel. Refer toTrim Panel Replacement - Liftgate (See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Trim
Panel Replacement - Liftgate) .
9. Close the liftgate.
