Uplander AWD V6-3.5L VIN 8 (2005)
Trunk / Liftgate Striker: Service and Repair
Latch Striker Replacement - Liftgate
Removal Procedure
1. Open the liftgate.
2. Remove screws (1) from liftgate striker (2).
3. Remove liftgate striker and rear stowage compartment bracket (3) from the rear floor.
Installation Procedure
1. Align the rear stowage compartment bracket (3), spacer, and liftgate striker (2) to the holes in body.
Notice: Refer toFastener Notice in Cautions and Notices.