Uplander AWD V6-3.5L VIN 8 (2005)
6. Lower the rear of the frame.
7. Remove the upper (1) and lower insulators (2) from the rear of the frame as a set.
Installation Procedure
1. Apply a thin coat of rubber lubricant GM P/N 1051717 (Canadian P/N 5728223), to the inside surface of the lower insulator and to the top surface
of the upper insulator.
2. Install the upper (1) and lower insulators (2) to the rear of the frame as a set.
3. Raise the rear of the frame.