Uplander AWD V6-3.5L VIN 8 (2005)
Passenger Assist Handle: Service and Repair
Assist Handle Replacement
Removal Procedure
1. Remove the body pillar upper trim panel. Refer toTrim Panel Replacement - Upper Center Pillar (See: Trim Panel/Service and Repair) .
2. Remove the assist handle retaining bolts.
3. Remove the assist handle from the vehicle.
Installation Procedure
1. Install the assist handle to the vehicle
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the assist handle retaining bolts.
Tighten the bolts to 10 Nm (89 lb in).
3. Install the body pillar upper trim panel. Refer toTrim Panel Replacement - Upper Center Pillar (See: Trim Panel/Service and Repair) .