Uplander AWD V6-3.5L VIN 8 (2005)
3. Remove the cowl side trim panel retainers using theJ 38778 .
4. Remove the cowl side trim panel from the vehicle.
Installation Procedure
1. Install the cowl side trim panel to the vehicle by aligning the trim panel with the slots in the cowl.
2. Install the cowl side trim panel retainers by pushing in on the panel to secure.
3. Install the I/P insulator panel. Refer toKnee Bolster, Insulator, Molding Replacement - Instrument Panel (See: Dashboard / Instrument
Panel/Service and Repair/Knee Bolster, Insulator, Molding Replacement - Instrument Panel) .
4. Install the front door sill plate. Refer toDoor Sill Plate Replacement (Door) (See: Scuff Plate/Service and Repair/Removal and Replacement/Door
Sill Plate Replacement (Door))Door Sill Plate Replacement (Sliding Door) (See: Scuff Plate/Service and Repair/Removal and Replacement/Door
Sill Plate Replacement (Sliding Door)) .
Trim Panel Replacement - Left Body Side Front
Trim Panel Replacement - Left Body Side Front
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the rear seats. Refer toSeat Replacement - Rear (See: Seats/Service and Repair/Seat Replacement - Rear) in Seats.
2. Remove the rear quarter trim panel. Refer toTrim Panel Replacement - Rear Quarter (Right) (See: Trim Panel Replacement - Rear Quarter
(Right))Trim Panel Replacement - Rear Quarter (Left) (See: Trim Panel Replacement - Rear Quarter (Left)) .
3. Remove the body pillar upper trim panel. Refer toTrim Panel Replacement - Upper Center Pillar (See: ) .
4. Remove the front door sill plate. Refer toDoor Sill Plate Replacement (Door) (See: Scuff Plate/Service and Repair/Removal and
Replacement/Door Sill Plate Replacement (Door))Door Sill Plate Replacement (Sliding Door) (See: Scuff Plate/Service and Repair/Removal and
Replacement/Door Sill Plate Replacement (Sliding Door)) .
5. Remove the body side front trim panel retainers using theJ 38778 .
6. Remove the body side front trim panel from the vehicle.
Installation Procedure