Uplander AWD V6-3.5L VIN 8 (2005)
Important
Always refer to the GM Approved Refinish Materials book GM PIN 4901 MD This book identities the paint systems you may use.
The basecoat/clearcoat paint is factory applied in the following 4 layers in order to give the finish a high gloss look:
1. A cathodic immersion primer
2. A primer/surfacer
3. A basecoat
4. A clear top coat (clearcoat)
Refer to the Service Parts ID Label to identify the type of top coat on the vehicle. This label contains all paint related information for the vehicle. This
includes paint technology, paint codes, trim level, and any special order paint colors.
Parts ID Label Location
The vehicle service parts identification label is located inside the instrument panel I/P compartment. The label is used to help identify the vehicle
original parts and options.
Basecoat/Clearcoat Paint Systems
Basecoat/Clearcoat Paint Systems
Caution: Exposure to isocyanates during paint preparation and application processes can cause severe breathing problems. Read and follow all of the
instructions from the manufacturers of painting materials, equipment, and protective gear.
All paint finish repairs of rigid exterior surfaces must meet GM standards. Refer to the latest revision of the GM Approved Refinish Materials book GM
P/N GM4901M-D to identify the paint systems you may use that have been engineered to meet GM standards. The GM Approved Refinish Materials
book supplies all approved products, including volatile organic compound (VOC) compliant regulations recommended by the individual manufacturer,
and detailed procedures for materials used in their paint system.
Paint Identification
Paint Identification
Caution: Exposure to isocyanates during paint preparation and application processes can cause severe breathing problems. Read and follow all of the
instructions from the manufacturers of painting materials, equipment, and protective gear.
