Service and Repair Procedures for Uplander AWD V6-35L VIN 8 Luggage Rack
1. Install the luggage carrier cross rail to the luggage carrier side rail.
2. Install the luggage carrier cross rail screws to the luggage carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Install the luggage carrier.
Luggage Carrier New Installation
LUGGAGE CARRIER NEW INSTALLATION
1. Turn the luggage carrier side rails upside down on a clean, flat surface.
2. Install the luggage carrier cross rails to the luggage carrier.
3. Install the luggage carrier cross rail screws to the luggage carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
4. Apply masking tape to all attaching areas of the roof.