Uplander AWD V6-3.5L VIN 8 (2005)
2. Install the limit switch and the bracket to the seat base.
3. Install the bolts to the limit switch bracket.
Tighten the bolts to 5.8 N.m (50 lb in).
4. Connect the electrical connector.
5. Set the limit switch to stop the lift in the proper location. Make the adjustment at the top hole on the slotted mounting bracket.
IMPORTANT: The switch body is delicate. Adjust and tighten the switch carefully.
6. Tighten the mounting screws until the screws are snug, yet the switch can still be moved easily by hand.
7. Operate the lift to the proper location. Slide the switch forward until the switch makes contact and clicks into place.
8. Hand tighten the switch.
