Uplander AWD V6-3.5L VIN 8 (2005)
2. Install BPMV and EBCM as an assembly onto the mounting bracket studs.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolt that connects the BPMV assembly to the mounting bracket.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
4. Install the BPMV bracket to the strut tower.
5. Install the 3 nuts (2) that attach the BPMV mounting bracket to the strut tower.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
^
Reposition any lines or hoses that were moved out of place.