Uplander AWD V6-3.5L VIN 8 (2005)
13. Remove the brake caliper bolts (3).
14. Remove the brake caliper from the brake caliper bracket.
15. Inspect the brake caliper pin boots (4) for:
^
Cuts
^
Tears
^
Deterioration - Replace the bolt boots if damage exists.
16. If the caliper pin boots are damaged, inspect the caliper pins for corrosion or damage. If corrosion is found on the brake caliper pin shaft, replace
the brake caliper pin and the brake caliper pin boot. Do not attempt to polish away the corrosion.
Installation Procedure
1. Ensure that the caliper bolt boots (3) are properly installed.