Uplander AWD V6-3.5L VIN 8 (2005)
1. Install the brake caliper bracket.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the brake caliper bracket bolts (1).
Tighten the rear brake caliper bracket bolts to 115 Nm (85 ft. lbs.).
3. Lubricate the brake caliper pin bolts with a thin coat of high temperature silicone lube.
4. Install the brake pad retainers to the brake caliper bracket.
5. Install the brake pads to the brake caliper bracket.
6. Install the brake caliper.
