Uplander AWD V6-3.5L VIN 8 (2005)
5. Install the brake cable in the retaining bracket (1) on the brake caliper.
Important: Maintain proper rear park brake cable routing and clearances. Verify that the rear park brake cables have a minimum of 10 mm and a
maximum of 12 mm of clearance to the wheel drive shafts (1). Maintain this clearance using retention straps or equivalent retention (2).
6. For vehicles equipped with ABS only, install the speed sensor harness to the trailing arm.
7. Install the brake cable (1) in the retaining bracket on the trailing arm.
