Uplander AWD V6-35L VIN 8 (2005) Front Parking Brake Cable Replacement
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Right Rear
The content of this article reflects the changes identified in TSB Bulletin No. #05-05-26-004 dated December 14, 2005.
Subject:
Revised Park Brake Cable Replacement - Left Rear (with IRS) and Park Brake Cable Replacement - Right Rear (with IRS)
Park Brake Cable Replacement - Right Rear
^
Tools Required
-
J 37043 Park Brake Cable Release Tool
Caution: Refer to Park Brake Cable to Caliper Caution in Service Precautions.
Removal Procedure
1. Remove the right rear wheel and tire.
2. Loosen the adjusting nut.
3. Remove the right rear brake cable (1) from the connector (2).