Uplander AWD V6-3.5L VIN 8 (2005)
Coolant Line/Hose: Service and Repair
Thermostat Bypass Pipes Replacement
^
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system.
2. Carefully remove the throttle body air inlet duct.
3. Remove the spark plug wires at the left bank.
4. Using the J 38185, reposition the hose clamp at the thermostat housing.
5. Remove the upper radiator hose from the housing.
6. Disconnect the heater outlet hose from the thermostat bypass pipe.
7. Remove the thermostat bypass pipe to throttle body fasteners.
8. Using the J 38185, reposition the hose clamp at the thermostat bypass pipe.
9. Disconnect the thermostat bypass pipe hose.