Uplander AWD V6-3.5L VIN 8 (2005)
Heater Core: Service and Repair
Heater Core Replacement
HEATER CORE REPLACEMENT
TOOLS REQUIRED
J 38185 (SA9111E) Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Disconnect both of the heater hose clamps at the heater core using the J 38185, or SA9111E.
3. Remove the heater hoses from the heater core.
4. Cap off the heater core pipes.
IMPORTANT: Cap off the heater core inlet and outlet pipes to prevent coolant spilling inside of the vehicle.
5. Remove the heater core cover.