Uplander AWD V6-3.5L VIN 8 (2005)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement
Coolant Heater Cord Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the engine coolant heater cord (2) from the engine coolant heater (1).
3. Remove the engine coolant heater cord straps.
4. Disconnect the upper engine coolant heater cord (2) from the diagonal brace strap.
5. Remove the engine coolant heater cord.
Installation Procedure
1. Install the engine coolant heater cord.