Uplander AWD V6-3.5L VIN 8 (2005)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter and Bypass Valve Assembly Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the oil filter.
3. Remove the oil filter bypass hole plug.
Important: Do not remove the oil filter fitting unless replacement or repair is needed.
4. Remove the oil filter fitting, if necessary.
Important: Do not pry against the threads in the oil filter bypass hole when removing the bypass valve.
5. Insert a flat bladed tool into the oil filter bypass hole and remove the bypass valve.
Installation Procedure
1. Install the oil filter bypass valve.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil filter fitting, if necessary.