Uplander AWD V6-3.5L VIN 8 (2005)
Catalyst Shield: Service and Repair
Catalytic Converter Heat Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the catalytic converter.
3. Use a drill to remove the catalytic converter heat shield rivets.
4. Remove the catalytic converter heat shield.
Installation Procedure
1. Install the catalytic converter heat shield.
2. Install the catalytic converter heat shield to the vehicle with new rivets.
3. Install the catalytic converter.
4. Lower the vehicle.
