Uplander AWD V6-3.5L VIN 8 (2005)
1. Install the exhaust manifold pipe gasket.
2. Return the exhaust system to the proper position.
3. Connect any hangers.
4. Remove the exhaust system support.
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the right exhaust manifold pipe stud nuts to the exhaust manifold pipe studs.
^
Tighten the right exhaust manifold pipe stud nuts to 35 Nm (26 ft. lbs.).
6. Inspect the exhaust system for leaks and underbody contact.
7. Lower the vehicle.