Uplander AWD V6-3.5L VIN 8 (2005)
Cabin Ventilation Grille: Service and Repair
Pressure Relief Valve Replacement
Removal Procedure
1. Remove the rear bumper fascia. Refer toFascia Replacement - Rear Bumper (Pontiac) ()Fascia Replacement - Rear Bumper (Buick) ()Fascia
Replacement - Rear Bumper (Chevrolet) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Rear Bumper (Chevrolet)) in Bumpers.
2. Use a small flat-bladed tool in order to push on the retainers from the outside of the quarter panel.
3. Remove the pressure relief valve from the body.
Installation Procedure
1. Install the pressure relief valve to the body.
2. Push in the pressure relief valve in order to secure the retainers into the body.
3. Install the rear bumper fascia. Refer toFascia Replacement - Rear Bumper (Pontiac) ()Fascia Replacement - Rear Bumper (Buick) ()Fascia
Replacement - Rear Bumper (Chevrolet) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Rear Bumper (Chevrolet)) in Bumpers.
