Uplander AWD V6-3.5L VIN 8 (2005)
Tighten the bolts/screws to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the I/P accessory trim plate.
5. Re-calibrate the actuators. Refer to Re-Calibrating Actuators.
Tighten the bolts/screws to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the I/P accessory trim plate.
5. Re-calibrate the actuators. Refer to Re-Calibrating Actuators.