Uplander AWD V6-3.5L VIN 8 (2005)
3. Install the auxiliary TXV to the evaporator core.
4. Install the auxiliary TXV to the evaporator core mounting bolts.
Tighten the bolts to 3.5 N.m (31 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Remove the cap or tape from the A/C lines.
6. Install the new sealing washers onto the A/C line.
7. Install the A/C lines to the auxiliary TXV.
8. Install the auxiliary TXV line block fitting retaining bolt.
Tighten the nut to 11 N.m (97 lb in).