Uplander AWD V6-3.5L VIN 8 (2005)
Heater Hose: Service and Repair
Heater Pipe - Auxiliary Rear
HEATER PIPE REPLACEMENT - AUXILIARY REAR
TOOLS REQUIRED
J 38185 (SA9111E) Hose Clamp Pliers
REMOVAL PROCEDURE
1. Disconnect the heater inlet and outlet hoses from the auxiliary heater inlet/outlet pipes using J 38185 or (SA9111E).
2. Drain the coolant system. Refer to Draining and Filling Cooling System.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the auxiliary heater inlet/outlet pipe clip nut (1).