Uplander AWD V6-3.5L VIN 8 (2005)
1. Lubricate and install the NEW O-ring seal (2). Refer to O-Ring Replacement.
2. Remove the cap or tape from the pressure relief valve port.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the high pressure relief valve (1).
Tighten the valve to 12 N.m (106 lb in).
4. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
5. Leak test the fitting of the component using J 39400-A.