Uplander AWD V6-3.5L VIN 8 (2005)
Compressor Clutch Relay: Service and Repair
COMPRESSOR RELAY REPLACEMENT
TOOLS REQUIRED
J 43244 Relay Puller Pliers
REMOVAL PROCEDURE
1. Remove the underhood electrical center cover.
2. Locate the compressor relay.
3. Using the J 43244 position the tool on opposing corners of the compressor relay.
IMPORTANT:
-
Always note the orientation of the relay.
-
Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
4. Remove the relay from the electrical center.
INSTALLATION PROCEDURE