Uplander AWD V6-3.5L VIN 8 (2005)
IMPORTANT: Do not cover the headlamp. This may cause excessive heat build up. Use a piece of cardboard forward of the headlamp to block the
light.
9. Adjust the screw (4) for the vertical aim of the headlamps to the specifications required by the state and the local authorities.
10. Rotate the headlamp adjuster to change the vertical aim of the headlamp.
11. Repeat the aiming procedure for the passenger side headlamp while blocking the light from projecting onto the screen from the driver side
headlamp.
12. Turn the headlamps OFF.
13. Close the hood.
