Uplander AWD V6-3.5L VIN 8 (2005)
8. Turn ON the low beam headlamps and block the light from projecting onto the screen from the passenger side headlamp.
IMPORTANT: Do not cover the headlamp. This may cause excessive heat build up. Use a piece of cardboard forward of the headlamp to block the
light.
9. Adjust the vertical aim of the headlamps to the specifications required by the state and the local authorities, or as shown in step number 8.
10. Rotate the headlamp adjuster to change the vertical aim of the headlamp.
11. Repeat the aiming procedure for the passenger side headlamp while blocking the light from projecting onto the screen from the driver side
headlamp.
12. Turn the headlamps OFF.
13. Close the hood.